View VLMK3100-GS08_4363041.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VLMK310.
Vishay Semiconductors
Standard SMD LED PLCC-2
FEATURES * SMD LED with exceptional brightness * Luminous intensity categorized * Compatible with automatic placement e3 equipment * EIA and ICE standard package * Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020B * Available in 8 mm tape * Low profile package * Non-diffused lens: excellent for coupling to light pipes and backlighting * Low power consumption * Luminous intensity ratio in one packaging unit IVmax/IVmin 1.6 * Lead (Pb)-free device * Preconditioning acc. to JEDEC level 2a * ESD-withstand voltage: up to 2 kV according to JESD22-A114-B * Automotive qualified AEC-Q101 APPLICATIONS * Automotive: backlighting in dashboards and switches * Telecommunication: indicator and backlighting in telephone and fax * Indicator and backlight for audio and video equipment * Indicator and backlight in office equipment * Flat backlight for LCDs, switches and symbols * General use
19225
DESCRIPTION This device has been designed to meet the increasing demand for AlInGaP technology. The package of the VLMK310. is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. PRODUCT GROUP AND PACKAGE DATA * Product group: LED * Package: SMD PLCC-2 * Product series: standard * Angle of half intensity: 60 PARTS TABLE
PART VLMK3100-GS08 VLMK3100-GS18 VLMK3102-GS08 VLMK3102-GS18 VLMK3105-GS08 VLMK3105-GS18
COLOR, LUMINOUS INTENSITY Red, IV > 11.2 mcd Red, IV > 11.2 mcd Red, IV = (22.4 to 56) mcd Red, IV = (22.4 to 56) mcd Red, IV = (35.5 to 90) mcd Red, IV = (35.5 to 90) mcd
TECHNOLOGY AllnGaP on GaAs AllnGaP on GaAs AllnGaP on GaAs AllnGaP on GaAs AllnGaP on GaAs AllnGaP on GaAs
Document Number 81230 Rev. 1.2, 04-Jun-08
For technical support, please contact: LED@vishay.com
www.vishay.com 1
VLMK310.
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS 1) VLMK310.
PARAMETER Reverse voltage 2) DC Forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Thermal resistance junction/ ambient mounted on PC board (pad size > 16 mm2) Tamb 85 C tp 10 s TEST CONDITION SYMBOL VR IF IFSM PV Tj Tamb Tstg RthJA VALUE 5 30 0.1 80 125 - 40 to + 100 - 40 to + 100 400 UNIT V mA A mW C C C K/W
Note: 1) T amb = 25 C, unless otherwise specified 2) Driving LED in reverse direction is suitable for short term application
OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMK310., RED
PARAMETER Luminous intensity
2)
TEST CONDITION IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 A VR = 0, f = 1 MHz
PART VLMK3100 VLMK3102 VLMK3105
SYMBOL IV IV IV d p VF VR Cj
MIN. 11.2 22.4 35.5
TYP. 50
MAX. 56 90
UNIT mcd mcd mcd nm nm deg
Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Note: 1) T amb = 25 C, unless otherwise specified 2) In one packing unit I Vmax/IVmin 2.0
630 643 60 1.9 5 15 2.6
V V pF
LUMINOUS INTENSITY CLASSIFICATION
GROUP STANDARD L M N P Q R 1 2 1 2 1 2 1 2 1 2 1 2 LIGHT INTENSITY (mcd) OPTIONAL MIN. 11.2 14.0 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 112.0 140.0 MAX. 14.0 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 112.0 140.0 180.0
In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable.
CROSSING TABLE
VISHAY VLMK3100 VLMK3102 VLMK3105 OSRAM LST676 LST676 LST676
Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel).
www.vishay.com 2
For technical support, please contact: LED@vishay.com
Document Number 81230 Rev. 1.2, 04-Jun-08
VLMK310.
Vishay Semiconductors
TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified
40 35
2.0 IVrel - Relative Luminous Intensity
0 10 20 30 40 50 60 70 80 90 100
16618
1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (C)
IF - Forward Current (mA)
30 25 20 15 10 5 0
16615
Tamb - Ambient Temperature (C)
Figure 1. Max. Permissible Forward Current vs. Ambient Temperature
Figure 4. Rel. Luminous Intensity vs. Ambient Temperature
0
10
20 30
2.0
IV rel - Relative Luminous Intensity
Ispec - Specific Luminous Intensity
- Angular Displacement
1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 1 2 5 10 20 50
40 1.0 0.9 0.8 0.7 50 60 70 80 0.6 0.4 0.2 0
95 10319
IF (mA) tP/T
96 11589
1
0.5
0.2
0.1 0.05
0.02
Figure 2. Rel. Luminous Intensity vs. Angular Displacement
Figure 5. Specific Luminous Intensity vs. Forward Current/Duty Cycle
100
10
IV rel - Relative Luminous Intensity
IF - Forward Current (mA)
1
10
0.1
1 1.0
95 10878
0.01 1.5 2.0 2.5 3.0
96 11588
1
10
100
VF - Forward Voltage (V)
IF - Forward Current (mA)
Figure 3. Forward Current vs. Forward Voltage
Figure 6. Relative Luminous Intensity vs. Forward Current
Document Number 81230 Rev. 1.2, 04-Jun-08
For technical support, please contact: LED@vishay.com
www.vishay.com 3
VLMK310.
Vishay Semiconductors
1.2 1.1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 600 610 620 630 640 650 660 670 680 690 700
96 12075
1000.00 t p /T = 0.01
I FM - Forward Current (mA)
1.0
0.02 0.05 0.1 100.00 0.2 0.5
I rel - Relative Intensity
1 10.00 0.01
0.10
1.00
10.00
100.00
- Wavelength (nm)
16622
tp - Pulse Length (ms)
Figure 7. Relative Intensity vs. Wavelength
Figure 9. Permissible Forward Current vs. Pulse Length
2.10
V Frel - Relative Forward Voltage
2.05 2.00 1.95 1.90 1.85 1.80 1.75 1.70 1.65 1.60 0
I F = 20 mA
Red
10
20
30
40
50
60
70
80
90 100
16617
Tamb - Ambient Temperature (C)
Figure 8. Forward Voltage vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters
Mounting Pad Layout 1.2 area covered with solder resist
2.6 (2.8)
4 1.6 (1.9)
20541
www.vishay.com 4
For technical support, please contact: LED@vishay.com
4
Document Number 81230 Rev. 1.2, 04-Jun-08
VLMK310.
Vishay Semiconductors
METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM3-SERIES) Vishay's LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED
10.4 8.4
120
4.5 3.5
Adhesive tape
2.5 1.5
13.00 12.75 62.5 60.0
Identification
Blister tape
Label: Vishay Type Group Tape Code Production Code Quantity
94 8670
321 329
14.4 max.
18857
Component cavity
Figure 12. Reel Dimensions - GS18
TAPING OF VLM.3..
SOLDERING PROFILE
IR Reflow Soldering Profile for Lead (Pb)-free Soldering
Preconditioning acc. to JEDEC Level 2a
3.5 3.1
2.2 2.0
300 250
4.0 3.6
Temperature (C)
5.75 5.25 3.6 3.4
1.85 1.65
255 C 240 C 217 C max. 30 s
max. 260 C 245 C
200 150 max. 120 s 100 50 max. ramp up 3 C/s max. ramp down 6 C/s max. 100 s
8.3 7.7
1.6 1.4
4.1 3.9
2.05 1.95
4.1 3.9
0.25
94 8668
0
Figure 10. Tape Dimensions in mm for PLCC-2
0
19885
50
100
150 Time (s)
200
250
300
max. 2 cycles allowed
REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.)
10.0 9.0
Figure 13. Vishay Leadfree Reflow Soldering Profile (acc. to J-STD-020B)
TTW Soldering 300 5s 235 C to 260 C first wave ca. 200 K/s 100 C to 130 C 100 50 2 K/s forced cooling ca. 5 K/s second wave ca. 2 K/s
(acc. to CECC00802) 948626-1
120
lead temperature full line: typical dotted line: process limits
250 Temperature (C) 200 150
4.5 3.5 2.5 1.5
13.00 12.75 63.5 60.5
Identification Label: Vishay Type Group Tape Code Production Code Quantity
180 178
14.4 max.
94 8665
0 0 50 100 Time (s) 150 200 250
Figure 11. Reel Dimensions - GS08
Figure 14. Double Wave Soldering of Opto Devices (all Packages)
Document Number 81230 Rev. 1.2, 04-Jun-08
For technical support, please contact: LED@vishay.com
www.vishay.com 5
VLMK310.
Vishay Semiconductors
BAR CODE PRODUCT LABEL RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: * Storage temperature 10 C to 30 C * Storage humidity 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 C + 5 C/- 0 C and < 5 % RH (dry air/nitrogen) or 96 h at 60 C + 5 C and < 5 % RH for all device containers or 24 h at 100 C + 5 C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags.
LEVEL This bag contains MOISTURE -SENSITIVE DEVICES
106 A H VISHAY 37
B
C
D
E
F
G
19884
A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: N2 = code for luminous intensity group D) Date code year/week E) Day code (e.g. 1: Monday) F) Batch no. G) Total quantity H) Company code
CAUTION
2a
1. Shelf life in sealed bag 12 months at <40C and < 90% relative humidity (RH) 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260C) must be: a) Mounted within 672 hours at factory condition of < 30C/60%RH or b) Stored at <10% RH. 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23C + 5C or b) 2a or 2b is not met. 4. If baking is required, devices may be baked for: 192 hours at 40C + 5C/-0C and <5%RH (dry air/nitrogen) or o or 96 hours at 605 Cand <5%RH For all device containers 24 hours at 1005C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113
19786
DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage.
Aluminum bag
Example of JESD22-A112 level 2a label
Label
Reel
15973
ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data.
FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes.
www.vishay.com 6
For technical support, please contact: LED@vishay.com
Document Number 81230 Rev. 1.2, 04-Jun-08
VLMK310.
Vishay Semiconductors
OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number 81230 Rev. 1.2, 04-Jun-08
For technical support, please contact: LED@vishay.com
www.vishay.com 7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VLMK3100-GS08

	To Download VLMK3100-GS08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .